Sensor Nivel De Agua 4033-1p Flotador 40mm


Hasta 12 cuotas

Sensor de Nivel de Liquido 

100V 0.5A PP

Tamaño: 40mm X 33mm 

Es sensor es NC (normal cerrado). Para que cambie a NA simplemente cambia el anclaje del sensor.
Ej: Si el sensor está con el flotador para abajo y el anclaje para arriba es NC 
Si el sensor está con el flotador para arriba y el anclaje para arriba es NA 

This is a PP material float switch and contains no mercury.
Light weight and simple working principle,high reliability.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other devices.
This float switch is a simple structure,easy installation liquid level controller.
It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperature can be used in any environment.
The versatility of this vertically mounted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water's rise or fall.
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm.

Switching voltage(Max): 100VDC
Breakdown voltage(Max): 220VDC
Contract rating(Max): 10W
Switching current(Max): 0.5A
Carry current(Max): 1.0A
Contract resistance(Max): 100 OHM
Contacts: Normally Closed
Temp Rating: -20°C ~ +80°C
Material: PP
Cable Length: 35cm