Malla Para Desoldar 150cm Largo - Varias Medidas Soldering Wire

R$18,57

Até 12x
LA PUBLICACIÓN CORRESPONDE A UNA UNIDAD DE:
MALLA DESOLDANTE De alta calidad.

Trabajamos los siguientes modelos, los cuales se podrás seleccionar desde las variantes del producto, dentro del a publicación, antes de comprar. 

Cualquier consulta sobre el stock, modelo, dimenciones, etc, realizarla ANTES de realizar la compra.

Modelo y ancho: 
HWY-1515 1.5mm
HWY-2015 2.0mm
HWY-2515 2.5mm
HWY-3015 3.0mm
HWY-3515 3.5mm
Largo: 150cm

How to use :
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.

Caution when using:
Do not force the tip against the desoldering wick to avoid injury to yourself or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
Only touch the grip and the pack of desoldering wick when desoldering.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.